Shop Online
We carry a full line of Diablo Cutting Tools
Innovation that is Redefining Cutting
At Best Lumber we carry Diablo’s premium brand of cutting tools and abrasives that are specifically designed for the contractor, remodeler, and skilled DIYer to provide superior performance while withstanding the most extreme conditions. Diablo products are manufactured in the world’s most technology-advanced facilities to consistently provide high-quality results every time; saving you time and money.
Diablo specializes in circular saw blades, reciprocating blades, sand paper, bonded abrasives, router bits and forstner bits... so no matter what job or results you need, Diablo has a specialized solution that is guaranteed to give you the best performance.
Circular Blades | Recp Blades | Concrete Drilling | Auger & Spade Bits | Oscillating Multi-tool | Sanding
Circular Blades
Ideal For: General construction applications, framers, roofers, remodelers, and concrete formers. Suggested Applications: Framing, Remodeling/Demolition, Siding/Decking, Masonry / Concrete Forming, Landscaping
Optimized performance on both corded & cordless tools.
Full Saw Blade catalog available:
7-1/4 in. x 24 Tooth Framing Saw Blade
D0724A-3
- Tracking Point™ tooth design acts provides straight cuts & control carbide wear for up to 5x longer cutting life vs other blades and 2X the durability in nail-embedded wood
- Tracking Point™ tooth design also delivers extreme cutting efficiency in corded and cordless saws (65% more cuts per battery charge in cordless saws versus other blades)
- Newly Enhanced Anti-Vibration design provides the ideal combination of stability and rigidity
- Perma-Shield Non-stick coating resists heat, gumming and corrosion
- Laser-Cut Thin kerf for less resistance and greater cutting efficiency
7-1/4 in. x 48 Tooth Cermet II Saw Blade for Metals and Stainless Steel
D0748CFA
- Cermet II (Ceramic and Metallic) teeth provide a high heat tolerance and increased hardness for superior wear and up to 5X longer than standard carbide metal cutting saw blades
- Triple Chip Tooth design provides less sparks and burr-free finishes that require no-rework
- Advanced Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping the blade cool for straight, accurate cuts
- Tri-Metal Shock Resistant Brazing, a three-metal brazing system, allows Cermet II teeth to withstand extreme impact for maximum durability
- Laser Cut Thin Kerf Design provides less resistance and heat build-up for ease of cut, accuracy and long cutting life in cordless or corded saws
- Perma-SHIELD® coating resists heat build-up by protecting the blade against gumming and corrosion
- Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation when in use
- Max RPM: 5800
7-1/4 in. x 4 Tooth Fiber Cement
D0704DH
- The only approved James Hardie polycrystalline diamond (PCD) tipped fiber cement saw blade
- The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades
- Feature a unique, spark-eroded Triple Chip grind for long life – up to 60 times the life in fiber cement of conventional carbide blades
- Perfect for full time use in heavy duty applications like cutting multiple pieces of fiber cement board.
- Note: Dust generation does not necessarily correlate directly to exposure risk.
9 in. Carbide General Purpose Recip
DS0909CGP
- Patented variable tooth technology provides faster cuts with less vibration
- Unique plunge tip design that enables faster and easier plunging in wood
- Perma-SHIELD® non-stick coated for less gumming and friction
- 1 in. demolition body for straighter cuts with less vibration
.jpg)
9 in. Bi-Metal Recip Blade for Nail Embedded Wood
DS0912BW
- Perma-shield coating protects the blade from heat, gumming, and corrosion
- 1 in. Demolition body for straighter cuts with less vibration
- Ultra hardened cutting edge for up to five times longer life than standard blades
- A one-of-a-kind tip design that enables faster and easier plunging
5 pc Carbide Recip Set
DS005SC
- 50X longer cutting life versus standard bi-metal reciprocating saw blades
- High-performance carbide for greater durability and cutting performance
- 1 in. demolition body delivers straighter cuts with less vibration
- Unique plunge tip design enables faster and easier plunging
- Perma-SHIELD coating protects blades from heat, gumming and corrosion
Concrete Drilling
Ideal For: General construction applications, framers, roofers, remodelers, and concrete formers. Suggested Applications: Framing, Remodeling/Demolition, Siding/Decking, Masonry / Concrete Forming, Landscaping
Optimized performance on both corded & cordless tools.
Full Saw Blade catalog available:
1 in. x 8 in. x 13 in. Rebar Demon™ SDS-Max 4-Cutter Full Carbide Head Hammer Drill Bit
DMAMX1210
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
1/2 in. x 4 in. x 6 in. Multi-Material Carbide Tipped Hammer Drill Bit
DMAMM1120
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard multi-purpose hammer drill bits
- Multi-Ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust/chip build-up faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
5/16 in. Tile & Stone Carbide Tipped Drill Bit
DMANS1040
- Diablo made carbide tip withstands impact for maximum durability and superior life versus standard tile and stone hammer drill bits
- Multi-Ground carbide tip delivers stability and accuracy required for fast, precise hole drilling
- 3-Flat Shank eliminates spinning in drill chucks
- Maximum performance in cordless and corded drill drivers
Auger & Spade Bits
Ideal For: General construction applications, framers, roofers, remodelers, and concrete formers. Suggested Applications: Framing, Remodeling/Demolition, Siding/Decking, Masonry / Concrete Forming, Landscaping
Optimized performance on both corded & cordless tools.
Full Saw Blade catalog available:
1-1/8 in. x 7-1/2 in. Auger Bit
DAG1140
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
1-1/8 in. x 4 in. SPEEDemon™ Spade Bit
DSP1070
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
4 in. Carbide-Tipped Wood & Metal Holesaw
DHS4000CT
- 64 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Oscillating Multi-tool
Ideal For: General construction applications, framers, roofers, remodelers, and concrete formers. Suggested Applications: Remodeling, Woodworking, General Purpose, Metal, Drywall, Sanding, Grout, Scraping.
Optimized performance on both corded & cordless tools.
Full Saw Blade catalog available:
1-1/4 in. Starlock Bi-Metal Oscillating Blades for Nail-Embedded Wood
DOS125BW3
- 3-Pack provides up to 33% in savings
- Ultra-hardened cutting edge for up to 5x longer life than standard blades
- Curve Contact Edge for precise, clean plunge cuts with less vibration
- Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
- 2 in. cutting depth
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
5 pc Starlock General Purpose Oscillating Blade Set
DOS5S
- 5-Piece set provides up to 50% in savings
- High performance carbide and bi-metal blades for greater durability, life and quality of cut
- Includes (1) DOS125BW 1-1/4 in. Bi-Metal Blade for Nail-Embedded Wood
- Includes (1) DOS125JBW 1-1/4 in. Bi-Metal Blade for Clean Wood
- Includes (1) DOS125CGP 1-1/4 in. Carbide Blade for General Purpose Cuts
- Includes (1) DOS125CF 1-1/4 in. Carbide Blade for Metal
- Includes (1) DOS200RBD 2 in. Bi-Metal Blade for Drywall
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
3-1/2 in. 60-Grit Starlock Carbide Grit Oscillating Sanding Plate
DOS60CGSP
- 60-Grit sanding plate for fast removal and leveling of paint & varnish
- Open-coat carbide grit reduces material buildup and clogging
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Recommended speed 2/3 max OPM
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
Sanding
Ideal For: General construction applications, framers, roofers, remodelers, and concrete formers. Suggested Applications: Renovation, woodworking, Remodeling/Demolition, Siding/Decking, Masonry / Concrete Forming
Optimized performance on both corded & cordless tools.
Full Saw Blade catalog available:
5 in. 180 Grit SandNet™ Discs with Connection Pad
DND050060H10I
- Fine grit for light stock removal and final sanding preparation before paint
- Clog-reducing net design for less dust build-up and up to 10X longer sanding life
- Premium ceramic grain blend for fast material removal and extra-long sanding life
- Reusable technology, simply shake, vaccum, or rinse and reuse
- Includes free connection pad (a $5 value) for easy attachment to tool
- Fits all 5 and 8-hole orbital sanders for fast alignment
3 in. x 18 in. Sanding Belt 36 Grit
DCB318036S02G
- Premium zirconium grain blend is a superior quality formulation designed for fast material removal and long sanding life
- Clog-SHIELD™, a proprietary blend of grinding agents that reduce pitch build-up and clogging
- ENDURA-BOND™, a specialized high strength resin provides superior grain bonding system for extreme durability
- For use on belt sanders in wood, metal and plastics
- Recommended use - for extra heavy stock removal, planing and sanding
3-3/4 in. 80-Grit Oscillating Detail Triangle Sanding Sheets
DCT334080H10G
- Premium ceramic grain blend for fast material removal and extra-long sanding life
- Premium Hook and Lock backing for a consistent secure connection
- Clog-SHIELD™ reduces pitch build-up and clogging
- ENDURA-BOND™ provides superior grit to backing bond for extreme durability
- Maximum performance in leveling and heavy stock or paint removal
- Optimized for cordless and oscillating tools
